|
|
|
|
ADD: No12,Xuejian Road,Xueyan Town,Changzhou,Jiangsu,China |
|
P.C.: 213169 |
|
Tel:+86-519-81190160 |
|
Fax:+86-519-81190162 |
|
E-mail:market@taileike.com |
|
URL:can2do.com |
|
|
|
XSG Series Flash Dryer
>> Descriptions
Our company and Shenyang Chemical Research
Institute of the Chemical Ministry of the State hav
developed this machine based on absorbing the foreign
advanced equipment and technology. This is a new kind
of drying equipment used for drying the aterials, such
as paste state, cake state, thixotropy, thermal sensitive
powder and particles. Our factory is equiped with the
testing achine, which can be used for carrying out
the drying tests of various feeds for our users and
for to provide the parameters to select the applicable
machine.
>> Principle
The hot air enters into the bottom of the dryer in tangent direction. Under the driving of the stirrer, a powerful rotating wind area is
formed. The paste state materials enter into the dryer through the screw charger. Under the powerful effect of stirring at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the hot-air flow. The grading rings will stop and keep the big particles. Small particles will be discharged out of the dryer from the ring center and will be collected in the cyclone and dust collector. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force and be smashed again after they fall down to the bottom.
>> Features
This machine combines the whirl technology with the fluidity, ejection and smashing step technologies.
The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized that " small
equipment can perform the large production".
The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency is high. The material stay time is very short. The quality of the final products is very good. The machine can be used for drying the heat sensitive materials. For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution.
|
|
|